Description
Specification
SLXD4 DIGITAL WIRELESS RECEIVER
SPECIFICATIONS
Dimensions (H × W × D)
1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm)
Weight
1.8 lb (816 g) without antennas
Housing
Galvanized Steel
Power Requirements
15 VDC @ 600 mA
Supplied by external power supply
(tip positive)
RF INPUT
Spurious Rejection
>75 dB Typical
Connector Type
BNC
Impedance
50 Ω
AUDIO OUTPUT
Gain Adjustment Range
–18 to +42 dB in 1 dB steps
Configuration
1/4″ (6.35 mm): Balanced
(Tip=audio +, Ring=audio –,
Sleeve=ground)
XLR: Balanced
(1=ground, 2=audio +, 3=audio –)
Impedance
1/4″ (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
Full Scale Output
1/4″ (6.35 mm): +15 dBV differentially
(+9 dBV single)
XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV
Mic/Line Switch
30 dB pad
Phantom Power Protection
1/4″ (6.35 mm): Yes
XLR: Yes
NETWORKING
Network Interface Single
Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100 m (328 ft)
SLXD2 DIGITAL WIRELESS HANDHELD TRANSMITTER
SPECIFICATIONS
(SUBJECT TO CHANGE)
Battery Type
Rechargeable Li-Ion
or 1.5 V AA batteries
Dimensions (Dia. × L)
1.46 × 6.93 in
(37.1 × 176 mm)
Weight
5.2 oz. (147 g)
Housing
Aluminum
AUDIO INPUT
Configuration
Unbalanced
Maximum Input Level
8.2 dBV
(2.57 Vrms, 7.27 Vpp)
Note: Dependent on Microphone Type
RF OUTPUT
Antenna Type
Integrated Single-Band Helical
Occupied Bandwidth
<200 kHz
Modulation Type
Shure Propietary Digital
Power
1 mW/10 mW
Varies by region.
See Frequency Range and
Output Power Table.
