| Configuration |
Compact two way, ported enclosure |
Transducers
Low Frequency TransducerHigh Frequency Transducer |
Dual 8-inch high power, treated paper cone, 2-inch voice coil, neodymium magnet1-inch high output compression driver |
Frequency Range1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB) |
80 Hz – 27.7 kHz
60 Hz – 29.5 kHz |
Maximum Output (SPL at 1 m)2
Fullrange (passive mode)
LF (biamp mode)
HF (biamp mode) |
| Continuous |
Peak |
| 120 dB |
126 dB |
| 124 dB |
130 dB |
| 121 dB |
127 dB |
|
Nominal Impedance
Passive
LF
HF |
8 ohms
8 ohms
8 ohms |
Power Rating3
Passive
LF
HF |
450 W (IEC 8 hours)
500 W (IEC 8 hours, 50 Hz – 2 kHz)
45 W (IEC 8 hours, 2 kHz – 20 kHz) |
Recommended Max Amp Power (Passive)
|
900 W RMS |
Sensitivity (SPL, 1 W at 1 m)4
Passive
LF
HF |
93 dB (100 Hz – 10 kHz)
97 dB (200 Hz – 2 kHz)
104 dB (2 kHz – 10 kHz) |
Nominal Coverage
|
90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) |
| Bass Loading |
Ported, tuned to 60 Hz |
Transformers (AD-S282HT)
|
| Type |
Custom low distortion laminated core, wide bandwidth design |
| Taps |
70V 200, 100, 50, 25 W; 8Ω bypass
100V 200, 100, 50 W; 8Ω bypass |
Enclosure
|
| Material |
Injection molded, weather resistant, high impact polystyrene |
| Finish |
White or black (paintable) |
| Weather Resistant |
Yes |
| Grille |
Heavy duty powder coated aluminum |
| Connectors |
Barrier strip, (switchable: passive/active on AD-S282H) |
| Mounting Hardware |
Yoke mount (included) |
| Weight |
27.7 lb (12.6 kg) net
35.6 lb (16.1 kg) shipping |
